How to Clean Exposed Aggregate Concrete

How to Clean Exposed Aggregate Concrete

Many of today’s homes feature attractive aggregate concrete flooring in the garage, driveway, and patio or pool side. This attractive flooring option is created by combining small stones with the concrete being set in place. Later when the concrete is drying the top layer of concrete is removed to exhibit the attractive stones beneath.

Some of the special advantages of this aggregate concrete flooring include:

  1. Affordable
    Concrete and attractive aggregates won’t cost as much as other flooring options and requires very few additional materials and time to achieve an attractive effect.
  2. Simple
    Any DIY enthusiast with minimal concrete laying skills will be able to create an attractive concrete floor. Maintenance and cleaning are also fairly easy operations.
  3. Durable
    Come wind or rain or heavy impact, the concrete floor is strong and durable.
  4. Safe
    The aggregates in the concrete make the floor slip proof even when wet.
  5. Versatile
    Because there are so many aggregates in all sizes and styles, aggregate concrete flooring can be used just about anywhere and suits the décor of a modern or traditional décor with equal confluence.
How to Clean Exposed Aggregate Concrete

Caring for Your Aggregate Concrete Floor

An exposed aggregate driveway floor that sees a lot of traffic will begin to lose some of its luster. This is due to the accumulation of grimes and debris as well as mineral deposits if your flooring sees a lot of water exposure. Pool sides and patios can have this problem.

Of course, cleaning aggregate concrete will require a little more time and effort than your regular concrete floor that just needs to be swept and hosed down. Aggregate concrete has a textured surface and even with regular resealing it is easy for particles to become lodged in these small crevices and diminish the beauty of your floors. To get more; visit: http://aggregatesamerica.net/how-to-get-the-exposed-aggregate-concrete-effect-using-sugar/

Cleaning and Maintaining Aggregate Concrete Floor

When faced with an aggregate concrete floor that requires your attention and service refer to this useful guide for making a potentially large job considerably easier. Begin, by regularly sweeping the concrete to minimize amounts of dust given accommodations in the textured floor.

After this, your floor is going to need a deeper cleaning every so often. The amount of traffic and dirt the floor experi8ences will decide how often this task must be done. Begin by choosing the easiest cleansing agent for the grime you are dealing with.

How to Clean Exposed Aggregate Concrete

Unless you are cleaning up greases and oils that have penetrated deeply into the aggregate concrete, simple cleansers and home cleaning agents are more than enough. A mixture of white vinegar, water and a spoon of dish cleaner is as effective as anything else you will find. Click here for more information about exposed aggregate.

You can check the efficacy of your potion on a small and especially contaminated portion of concrete before you commit to using this agent on the entire floor. If the cleaning solution seems effective begin the following steps.

Step 1 – Sweep off the loose debris and if possible hose off the floor and sweep away excess water to begin working on a nice clean surface.

Step 2 – The only dirt left should be the tough stuff that won’t budge. Loosen its resolve by soaking the entire floor in your cleaning solution and give it some time to soak in, maybe 5 to 15 minutes depending on the needs.

How to Clean Exposed Aggregate Concrete

Step 3 – Before the solution has had a chance to dry, begin scrubbing the surface systematically from one side to the other. Using a stiff bristled brush, use multidirectional motions to ensure that the rough textures are addressed from all sides.

Step 4 – Using a garden hose, or better yet a pressure washer, use water pressure to rinse off all vestiges of cleaning solutions and grime from the concrete. At this point you may notice some spots that require a bit of extra work. Go ahead and address those for a premium finish.

Step 5 – Allow the floor to dry completely and inspect the surface. If the sealant is not doing its job of keep moistures and contaminants from entering the concrete it may be time to reseal the surface.

How To Get The Exposed Aggregate Concrete Effect Using Sugar

How To Get The Exposed Aggregate Concrete Effect Using Sugar

If you are pouring concrete, and you want to achieve the best exposed aggregate finish possible, you must use some type of a water reducer, also called a set retarder. The main purpose of this material is to reduce the speed at which the concrete will set. This will enable more plastic properties to occur, and will also show more of the aggregate material at the surface. There are other benefits to doing this including the fact that the concrete will not crack as easily. It will also reduce permeability, making it last much longer. This combination of a better appearance, combined with a more durable form of concrete, is why people will use set retarders that are Sugar based.

How To Get The Exposed Aggregate Concrete Effect Using Sugar

Why Are Set Retarder Sugar Based?

There is a chemical reason why sugar can slow down the setting rate of concrete. That’s why most of the store-bought retarder products will have some type of sugar. You might assume that you can use sugar on your concrete to get the same effect. However, it may not be that easy to achieve the best results. For some people, especially those on a budget, they might try to mix sugar in with the concrete so that the aggregate material comes throughout the top. Even if you did this properly, it’s also recommended that you have a professional do it for you. Using the right material does not always mean that you will get the best result.

Where To Get Sugar Based Retarder Solutions

Getting these solutions is easy to do. They sell these that many stores. You can pick them up when you are getting your concrete. If you are having your concrete delivered, you might ask company that is bringing this for you if they have the retarder solution, and if they wouldn’t mind doing this for you as the concrete is poured. This will cost a little bit extra, but it will ensure that the process is done properly. You have to remember that once the concrete sets, there is no turning back. It must be done the right way the first time or you may have to replace the concrete once it has set if it doesn’t look the way that it should. Click here for more information.

How To Get The Exposed Aggregate Concrete Effect Using Sugar

How To Find Companies That Will Do This For You

Finding businesses that will do the exposed aggregate concrete pouring for you is easy. Look on the web, contact each concrete business, and see if they know what you are talking about. If they do, get estimates from a couple of the businesses. Eventually, they will be able to give you a price that is affordable for you. If you have been hesitant in doing this, it’s probably because you don’t know how to do this, or that you are concerned about how it will look once you do this yourself. To save yourself the time and money, go ahead and find one of these businesses that can pour the concrete and use the sugar based set retarder to produce that wonderful aggregate material effect.

Visit: http://aggregatesamerica.net/how-to-clean-exposed-aggregate-concrete/ to get more about how to clean exposed aggregate concrete.

Exposed Aggregate Concrete Steps Are Attractive and Safe to Use

Exposed Aggregate Concrete Steps Are Attractive and Safe to Use

When laying out steps or any other concrete surface, using exposed aggregate concrete can make for a unique and durable surface for steps. The exposed aggregate will afford more traction and reduce the possibility of any accidents from slipping. Click here to get about how to clean exposed aggregate concrete.

To create steps in your garden or other areas that have exposed aggregate concrete you will need to pour the concrete as you would do traditionally, after providing the necessary formwork that will provide the steps. It can help if then retarders are used over the surfaces of the steps so that the top layer of concrete is prevented from setting and drying. Once the rest of the concrete has set, the top layer is washed away with a spray or jet of water to remove the cement and expose all the sand and other aggregates. This will give a surface that is uneven and fully expose the aggregates in the top layer of concrete. To get also about waste concrete aggregate; visit: https://www.science.gov/topicpages/w/waste+concrete+aggregate

Another way of creating a top layer of exposed concrete will be to press in bits of stone or pebbles into the top layer of concrete before it has set. They must be spread evenly across the surface and pressed in to get embedded in the concrete. You can then get a unique texture and appearance to your concrete steps. Polishing this exposed concrete surface can then give the surface a distinct shine and make it look like granite or other natural stone.

Exposed Aggregate Concrete Steps Are Attractive and Safe to Use

Steps made of exposed aggregate concrete will give surfaces that are very strong. The finish is rugged and will do well to take all the traffic that steps normally have to during their use. You will never skid or slip on such surfaces, and this makes the steps that much safer to use. The surface is durable and will last for years. These steps will not be difficult to maintain, though the rough texture can lead to the accumulation of dirt and dust, that can be easily washed away. It is a form of finish that goes well with coloring, staining, stenciling, or imprinting.

Repairs to exposed concrete can be difficult as this can disturb particular patterns so that the repaired area will always look different from the other surface of the steps. A lot of care has to be taken to obtain uniformity of appearance when you are creating the exposed aggregate surface.

Exposed Aggregate Concrete Steps Are Attractive and Safe to Use

Exposed aggregate concrete in steps is best restricted to the risers that are the surface exposed during the concreting that can be easily treated to create the necessary looks. It adds visual interest to the surface and colors and designs that are random and unique. It is cost effective and in no way compromises on the strength of the concrete. It is hardwearing and is therefore very suitable for steps, footpaths and public areas that see a lot of traffic.

The texture and color options that exposed aggregate concrete offers are limitless. It does not require much in the form of tools or equipment and its creation is a skill that can be easily mastered.