How to Clean Exposed Aggregate Concrete

How to Clean Exposed Aggregate Concrete

Many of today’s homes feature attractive aggregate concrete flooring in the garage, driveway, and patio or pool side. This attractive flooring option is created by combining small stones with the concrete being set in place. Later when the concrete is drying the top layer of concrete is removed to exhibit the attractive stones beneath.

Some of the special advantages of this aggregate concrete flooring include:

  1. Affordable
    Concrete and attractive aggregates won’t cost as much as other flooring options and requires very few additional materials and time to achieve an attractive effect.
  2. Simple
    Any DIY enthusiast with minimal concrete laying skills will be able to create an attractive concrete floor. Maintenance and cleaning are also fairly easy operations.
  3. Durable
    Come wind or rain or heavy impact, the concrete floor is strong and durable.
  4. Safe
    The aggregates in the concrete make the floor slip proof even when wet.
  5. Versatile
    Because there are so many aggregates in all sizes and styles, aggregate concrete flooring can be used just about anywhere and suits the décor of a modern or traditional décor with equal confluence.
How to Clean Exposed Aggregate Concrete

Caring for Your Aggregate Concrete Floor

An exposed aggregate driveway floor that sees a lot of traffic will begin to lose some of its luster. This is due to the accumulation of grimes and debris as well as mineral deposits if your flooring sees a lot of water exposure. Pool sides and patios can have this problem.

Of course, cleaning aggregate concrete will require a little more time and effort than your regular concrete floor that just needs to be swept and hosed down. Aggregate concrete has a textured surface and even with regular resealing it is easy for particles to become lodged in these small crevices and diminish the beauty of your floors. To get more; visit: http://aggregatesamerica.net/how-to-get-the-exposed-aggregate-concrete-effect-using-sugar/

Cleaning and Maintaining Aggregate Concrete Floor

When faced with an aggregate concrete floor that requires your attention and service refer to this useful guide for making a potentially large job considerably easier. Begin, by regularly sweeping the concrete to minimize amounts of dust given accommodations in the textured floor.

After this, your floor is going to need a deeper cleaning every so often. The amount of traffic and dirt the floor experi8ences will decide how often this task must be done. Begin by choosing the easiest cleansing agent for the grime you are dealing with.

How to Clean Exposed Aggregate Concrete

Unless you are cleaning up greases and oils that have penetrated deeply into the aggregate concrete, simple cleansers and home cleaning agents are more than enough. A mixture of white vinegar, water and a spoon of dish cleaner is as effective as anything else you will find. Click here for more information about exposed aggregate.

You can check the efficacy of your potion on a small and especially contaminated portion of concrete before you commit to using this agent on the entire floor. If the cleaning solution seems effective begin the following steps.

Step 1 – Sweep off the loose debris and if possible hose off the floor and sweep away excess water to begin working on a nice clean surface.

Step 2 – The only dirt left should be the tough stuff that won’t budge. Loosen its resolve by soaking the entire floor in your cleaning solution and give it some time to soak in, maybe 5 to 15 minutes depending on the needs.

How to Clean Exposed Aggregate Concrete

Step 3 – Before the solution has had a chance to dry, begin scrubbing the surface systematically from one side to the other. Using a stiff bristled brush, use multidirectional motions to ensure that the rough textures are addressed from all sides.

Step 4 – Using a garden hose, or better yet a pressure washer, use water pressure to rinse off all vestiges of cleaning solutions and grime from the concrete. At this point you may notice some spots that require a bit of extra work. Go ahead and address those for a premium finish.

Step 5 – Allow the floor to dry completely and inspect the surface. If the sealant is not doing its job of keep moistures and contaminants from entering the concrete it may be time to reseal the surface.